Optiquest iRIS 320 Manual do Utilizador descarregar pdf (Página 20)

iRIS 220 / iRIS 320, V1.19 User Guide - 18

iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: ique[email protected]

3.5 Antenna Connection

The iRIS can be supplied with an optional ground plane independent dipole antenna.

• iRIS 220 antenna connects to a female BNC connector that protrudes through the end of the case.

• iRIS 320 / iRIS 320V antenna is fitted through a compression gland in the bottom of the case.

Internally, the antenna terminates at a female BNC connector on the circuit board.

In areas of marginal coverage, this antenna can be removed and replaced with an external high gain

antenna such as a Yagi, via appropriate low-loss high frequency coaxial cable and male BNC connector.

3.6 Mounting – iRIS 220

An outline of the iRIS 220 case is shown below. The recommended mounting screws are M4 machine

screws or Twinfast® wood screws.

Figure 9 - iRIS 220 Mounting Diagram

150 mm

80 mm

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 72 73

Sem comentários

Optiquest iRIS 320 Manual do Utilizador Página 20